Safety Showers

/Safety Showers
  • ESS

    $94,000.00
    Enclosed Safety Shower
  • GES1P

    $19,500.00
    Wide-Format Cubicle Safety Shower

    ANSI  Z358.1 2009-Compliant Safety Shower/Eyewash, when plumbed to a Tepid water supply (60°F to 100°F; 16°C to 38°C)

    Guarantees 15 Minutes of 20 gpm (75L/m) Tepid Drench

    The GES1R Wide-Format Cubicle configuration is an industry-leading, cubicle safety shower that is designed for internal or external use in temperatures ranging from 10°F to 100°F (-12°C to 38°C) and where a tepid potable water supply is available. The cubicle is extra-large to accommodate a victim, plus an additional worker or supervisor to assist the victim. This shower features:

    •  Extra-wide cubicle
    • Stainless Steel (304) Frame
    • Side & Rear Panels
    • Internal, Self-Draining Eyebath
    • 1” Stainless Steel Inlet
    • Overhead ABS Rose with 20gpm flow
    • Walk-on, Grated GRP Platform
    • Drain Sump with 2” Stainless Steel Outlet
    • Front Over-lapping Curtain Provides Easy Access, Protection & Privacy, and Containment of Wash-Off
    • Internal Low-Energy Lamp

    The GES1R Wide-Format Cubicle configuration is an industry-leading, cubicle safety shower that is designed for internal or external use in temperatures ranging from 10°F to 100°F (-12°C to 38°C) and where a tepid potable water supply is available. The cubicle is extra-large to accommodate a victim, plus an additional worker or supervisor to assist the victim. It features side and rear panels and a walk-through curtain made of heavy, over-lapping, flexible, plastic strips that provide quick access, protection and privacy for the user, and containment of the wash-off. The shower cubicle frame is made of 304 Stainless Steel, with 316 available as an option. Mild steel and galvanized steel are not used, as these may corrode over time and weaken the frame. All valves and fittings are stainless steel. The GRP outer covering includes an Isophthalic Gelcoat finish which provides excellent weathering properties as well as very good water resistance. The overhead ABS rose provides the ANSI-required 20 US Gallons per Minute flow. The integrated eyewash, located inside the unit, provides the ANSI-required 3 US Gallons per minute flow. The shower is available in 110VAC or 240VAC single-phase. In addition to using industrial-strength adhesive to adhere the GRP to the Stainless Steel frame, the GRP is also riveted to the frame. This is unique in the industry and prevents the “peeling” effect other showers can experience over time. The shower is activated by an interior panic bar, while the eyewash is activated by lifting its protective cover. The floor of the shower is a non-slip, luminous GRP grate and underneath the grate is a drain sump which channels the wash-off to a 2” Stainless Steel outlet at the bottom rear of the shower for easy disposal. An internal, low-energy lamp provides illumination inside the cubicle.

    This safety shower meets all standards of ANSI Z358.1 2009 for emergency eyewash and safety showers. It will provide many years of reliable, trouble-free protection.

    Options Available:

    • CSA-Certification as an Assembly
    • Flashing Strobe and Siren w/Microswitches
    • Mixing Valve
    • Anti-scald Valve
    • Sun Canopy
    • Water Chiller
    • Liquid-activated Sump Pump
    • GES8 8-Nozzle Version for Complete Decontamination
    • Spring-Loaded Doors
    • Arctic Version
  • GES1R

    $18,500.00

    Standard Configuration

    ANSI  Z358.1 2009-Compliant Safety Shower/Eyewash, when plumbed to a Tepid water supply (60°F to 100°F; 16°C to 38°C)

    Guarantees 15 Minutes of 20 gpm (75L/m) Tepid Drench

    The GES1R Standard configuration is an industry-leading, cubicle safety shower that is designed for internal or external use in temperatures ranging from 10°F to 100°F (-12°C to 38°C) and where a tepid potable water supply is available. It features:

    • Stainless Steel (304) Frame
    • Side & Rear Panels
    • External, Self-Draining Eyebath
    • 1” Stainless Steel Inlet
    • Overhead ABS Rose with 20gpm flow
    • Walk-on, Grated GRP Platform
    • Drain Sump with 2” Stainless Steel Outlet
    •  Front Over-lapping Curtain Provides Easy Access, Protection & Privacy, and Containment of Wash-Off
    •  Internal Low-Energy Lamp
    The GES1R Standard configuration is an industry-leading, cubicle safety shower that is designed for internal or external use in temperatures ranging from 10°F to 100°F (-12°C to 38°C) and where a tepid potable water supply is available. It features side and rear panels and a walk-through curtain made of heavy, over-lapping, flexible, plastic strips that provide quick access, protection and privacy for the user, and containment of the wash-off. The shower cubicle frame is made of 304 Stainless Steel, with 316 available as an option. Mild steel and galvanized steel are not used, as these may corrode over time and weaken the frame. All valves and fittings are stainless steel. The GRP outer covering includes an Isophthalic Gelcoat finish which provides excellent weathering properties as well as very good water resistance. The overhead ABS rose provides the ANSI-required 20 US Gallons per Minute flow. The integrated eyewash, which is located on the exterior of the unit, provides the ANSI-required 3 US Gallons per minute flow. The shower is available in 110VAC or 240VAC single-phase. In addition to using industrial-strength adhesive to adhere the GRP to the Stainless Steel frame, the GRP is also riveted to the frame. This is unique in the industry and prevents the “peeling” effect other showers can experience over time. The shower is activated by an interior panic bar, while the eyewash is activated by lifting its protective cover. The floor of the shower is a non-slip, luminous GRP grate and underneath the grate is a drain sump which channels the wash-off to a 2” Stainless Steel outlet at the bottom rear of the shower for easy disposal. An internal, low-energy lamp provides illumination inside the cubicle. This safety shower meets all standards of ANSI Z358.1 2009 for emergency eyewash and safety showers. It will provide many years of reliable, trouble-free protection. Options Available:
    • CSA-Certification as an Assembly
    • Flashing Strobe and Siren w/Microswitches
    • Mixing Valve
    • Anti-scald Valve
    • Sun Canopy
    • Water Chiller
    • Liquid-activated Sump Pump
    • GES8 8-Nozzle Version for Complete Decontamination
  • GFTS15

    $24,000.00

    Standard Configuration

    ANSI  Z358.1 2009-Compliant Safety Shower/Eyewash

    Guarantees 15 Minutes of 20 gpm (75L/m) Tepid Drench
    The GFTS15 Standard configuration is an industry-leading, tank-fed safety shower that is designed for use in areas that experience temperatures ranging from 10°F to 100°F (-12°C to 38°C) and where potable water is not available. This shower is also used to provide a reliable, ANSI-compliant safety shower/eyewash combination that will always provide drench, even if mains water or wells fail. This tank-fed safety shower features:
    • Insulated, Sealed Header Tank with Immersion Heater
    • Stainless Steel Frame
    • GRP Side and Rear Panels Riveted to the Frame
    • 1” Stainless Steel Inlet
    • Overhead ABS rose and Internal Tank-Fed Eyewash
    • Stainless Steel Panic Bar and Testing Lever
    • All required Safety Signage
    • Luminous, Grated Walk-on Platform
    • Drain Sump with 2” Stainless Steel Outlet
    • Visual “Quick Check” Water Level Indicator
    • Internal, Low-Energy Lamp
    The GFTS15 Standard configuration is an industry-leading, tank-fed safety shower that is designed for use in areas that experience temperatures ranging from 10°F to 100°F (-12°C to 38°C) and where potable water is not available. This shower is also used to provide a reliable, ANSI-compliant safety shower/eyewash combination that will always provide drench, even if mains water or wells fail. It features side and rear panels and a walk-through curtain made of heavy, over-lapping, flexible, plastic strips that provide quick access, protection and privacy for the user, and containment of the wash-off. The shower cubicle frame is made of 304 Stainless Steel, with 316 available as an option. Mild steel and galvanized steel are not used, as these may corrode over time and weaken the frame. All valves and fittings are stainless steel. The Glass and Resin tank is insulated with 50mm of highly-efficient Polyurethane insulation, providing protection from solar gain and loss and is complete with an Isophthalic Gelcoat finish which provides excellent weathering properties as well as very good water resistance. The tank is complete with UV stability compounds and is filled via a 1” Stainless Steel inlet, situated on the back of the tank near the top. The overhead ABS rose provides the ANSI-required 20 US Gallons per Minute flow. The integrated eyewash provides the ANSI-required 3 US Gallons per minute flow. The immersion heater includes an integrated stat to adjust the maintenance temperature of the stored water. The shower is available in 110VAC or 240VAC single-phase. In addition to using industrial-strength adhesive to adhere the GRP to the Stainless Steel frame, the GRP is also riveted to the frame. This is unique in the industry and prevents the “peeling” effect other showers can experience over time. The shower is activated by an interior panic bar, while the eyewash is activated by lifting its protective cover. The floor of the shower is a non-slip, luminous GRP grate and underneath the grate is a drain sump which channels the wash-off to a 2” Stainless Steel outlet at the bottom rear of the shower for easy disposal. A visual water level indicator on the tank exterior allows for at-a-glance water level assessment. An internal, low-energy lamp provides illumination inside the cubicle. A testing lever is included for simple testing and alarm reset (if applicable). This safety shower meets all standards of ANSI Z358.1 2009 for emergency eyewash and safety showers. It will provide many years of reliable, trouble-free protection. Options Available:
    • CSA-Certification as an Assembly
    • Flashing Strobe and Siren w/Microswitches
    • 1-Year Water Treatment Kit
    • Economy Configuration
    • Extreme Hot Climate Configuration
    • Marine Configuration for Platform Rigs, Ocean-going Vessels, and Outdoor Coastal Facilities
    • Sun Canopy
    • Water Chiller
    • Low-Water Alarm
    • Liquid-activated Sump Pump
    • Arctic Configuration for Temperature Extremes to -67°F (-55°C)
  • GFTS15A

    $37,500.00

    Arctic Configuration

    ANSI  Z358.1 2009-Compliant Safety Shower/Eyewash

    Guarantees 15 Minutes of 20 gpm (75L/m) Tepid Drench

    The GFTS15AH is an industry-leading, tank-fed safety shower that is designed for use in areas that may experience extreme cold and where potable water is not available. This shower is also used to provide a reliable, ANSI-compliant safety shower/eyewash combination that will always provide drench, even if mains water or wells fail. This Arctic configuration is designed for indoor or outdoor use and is capable of full function in extremely cold temperatures down to -67°F (-55°C). This Safety Shower includes:

    • Insulated, Sealed Header Tank with Immersion Heater
    • Stainless Steel Frame
    • Insulated GRP Side and Rear Panels Riveted to the Frame
    • Insulated, Spring-Loaded Doors for quick and easy access
    • 1” Stainless Steel Inlet
    • Overhead ABS rose and Internal Tank-Fed Eyewash
    • Stainless Steel Panic Bar and Testing Lever
    • All required Safety Signage
    • Luminous, Grated Walk-on Platform
    • Drain Sump with 2” Stainless Steel Outlet
    • Visual “Quick Check” Water Level Indicator
    • Internal, Low-Energy Lamp
    • Cubicle Heater to provide safe and comfortable cubicle air temperature
    This Arctic configuration is designed for indoor or outdoor use and is capable of full function in extremely cold temperatures down to -67°F (-55°C). It features insulated, spring-loaded doors with monitoring windows, which provide quick access, protection and privacy for the user, and containment of the wash-off. The side and rear panels are also fully-insulated. The shower cubicle frame is made of 304 Stainless Steel, with 316 available as an option. Mild steel and galvanized steel are not used, as these may corrode over time and weaken the frame. All valves and fittings are stainless steel. The Glass and Resin tank is insulated with 50mm of highly-efficient Polyurethane insulation, providing protection from solar gain and loss and is complete with an Isophthalic Gelcoat finish which provides excellent weathering properties as well as very good water resistance. The tank is complete with UV stability compounds and is filled via a 1” Stainless Steel inlet, situated on the back of the tank near the top. The overhead ABS rose provides the ANSI-required 20 US Gallons per Minute flow. The integrated eyewash provides the ANSI-required 3 US Gallons per minute flow. The immersion heater includes an integrated stat to adjust the maintenance temperature of the stored water. The cubicle is heated by a 475W heater that provides a safe air temperature inside the cubicle while temperatures outside the shower reach extreme lows. The shower is available in 240VAC single-phase. The tank and cubicle sides are made of UV-resistant, heavy GRP. In addition to using industrial-strength adhesive to adhere the GRP to the Stainless Steel frame, the GRP is also riveted to the frame. This is unique in the industry and prevents the “peeling” effect other showers can experience over time. The shower is activated by an interior panic bar, while the eyewash is activated by lifting its protective cover. The floor of the shower is a non-slip, luminous GRP grate and underneath the grate is a drain sump which channels the wash-off to a 2” Stainless Steel outlet at the bottom rear of the shower for easy disposal. A visual water level indicator on the tank exterior allows for at-a-glance water level assessment. An internal, low-energy lamp provides illumination inside the cubicle. A testing lever is included for simple testing and alarm reset (if applicable). This safety shower meets all standards of ANSI Z358.1 2009 for emergency eyewash and safety showers. It will provide many years of reliable, trouble-free protection. Options Available:
    • CSA-Certification as an Assembly
    • Flashing Strobe and Siren w/Microswitches
    • 1-Year Water Treatment Kit
    • Economy Configuration
    • Extreme Hot Climate Configuration
    • Marine Configuration for Platform Rigs, Ocean-going Vessels, and Outdoor Coastal Facilities
    • Low-Water Alarm
    • Liquid-activated Sump Pump
  • GFTS15A-CR

    $78,400.00
    Arctic Configuration with Changing Room Option ANSI Z358.1 2009-Compliant Safety Shower/Eyewash Guarantees 15 Minutes of 20 gpm (75L/m) Tepid Drench The GFTS15AH is an industry-leading, tank-fed safety shower with an ample Changing Room that is designed for use in areas that may experience extreme cold and where potable water is not available. The changing room allows the victim to change into dry clothes prior to re-entering cold, outside air. This shower is also used to provide a reliable, ANSI-compliant safety shower/eyewash combination that will always provide drench, even if mains water or wells fail. This Arctic configuration is designed for indoor or outdoor use and is capable of full function in extremely cold temperatures down to -67°F (-55°C). This Safety Shower includes:
    • Changing Room Attached to Shower Cubicle
    • Insulated, Sealed Header Tank with Immersion Heater
    • Stainless Steel Frame
    • Insulated GRP Side and Rear Panels Riveted to the Frame
    • Insulated, Spring-Loaded Doors for quick and easy access
    • 1” Stainless Steel Inlet
    • Overhead ABS rose and Internal Tank-Fed Eyewash
    • Stainless Steel Panic Bar and Testing Lever
    • All required Safety Signage
    • Luminous, Grated Walk-on Platform
    • Drain Sump with 2” Stainless Steel Outlet
    • Visual “Quick Check” Water Level Indicator
    • Internal, Low-Energy Lamp
    • Cubicle Heater to provide safe and comfortable cubicle air temperature
    This Arctic configuration with attached Changing Room is designed for indoor or outdoor use and is capable of full function in extremely cold temperatures down to -67°F (-55°C). It features an ample Changing room to provide wet victim the opportunity to put on dry clothes after showering, but before re-entering the cold outside air. insulated, spring-loaded doors with monitoring windows, which provide quick access, protection and privacy for the user, and containment of the wash-off. The side and rear panels are also fully-insulated. The shower cubicle frame is made of 304 Stainless Steel, with 316 available as an option. Mild steel and galvanized steel are not used, as these may corrode over time and weaken the frame. All valves and fittings are stainless steel. The Glass and Resin tank is insulated with 50mm of highly-efficient Polyurethane insulation, providing protection from solar gain and loss and is complete with an Isophthalic Gelcoat finish which provides excellent weathering properties as well as very good water resistance. The tank is complete with UV stability compounds and is filled via a 1” Stainless Steel inlet, situated on the back of the tank near the top. The overhead ABS rose provides the ANSI-required 20 US Gallons per Minute flow. The integrated eyewash provides the ANSI-required 3 US Gallons per minute flow. The immersion heater includes an integrated stat to adjust the maintenance temperature of the stored water. The cubicle is heated by a 475W heater that provides a safe air temperature inside the cubicle while temperatures outside the shower reach extreme lows. The shower is available in 240VAC single-phase. The tank and cubicle sides are made of UV-resistant, heavy GRP. In addition to using industrial-strength adhesive to adhere the GRP to the Stainless Steel frame, the GRP is also riveted to the frame. This is unique in the industry and prevents the “peeling” effect other showers can experience over time. The shower is activated by an interior panic bar, while the eyewash is activated by lifting its protective cover. The floor of the shower is a non-slip, luminous GRP grate and underneath the grate is a drain sump which channels the wash-off to a 2” Stainless Steel outlet at the bottom rear of the shower for easy disposal. A visual water level indicator on the tank exterior allows for at-a-glance water level assessment. An internal, low-energy lamp provides illumination inside the cubicle. A testing lever is included for simple testing and alarm reset (if applicable). This safety shower meets all standards of ANSI Z358.1 2009 for emergency eyewash and safety showers. It will provide many years of reliable, trouble-free protection. Options Available:
    • CSA-Certification as an Assembly
    • Flashing Strobe and Siren w/Microswitches
    • 1-Year Water Treatment Kit
    • Economy Configuration
    • Extreme Hot Climate Configuration
    • Marine Configuration for Platform Rigs, Ocean-going Vessels, and Outdoor Coastal Facilities
    • Low-Water Alarm
    • Liquid-activated Sump Pump
  • GPS12 ET

    $23,500.00

    All-Electric Trailer-Mounted, Transportable Safety Shower

    ANSI  Z358.1 2009-Compliant Safety Shower/Eyewash

    Guarantees 15 Minutes of 20 gpm (75L/m) Tepid Drench

    The GPS12ET is an innovative, industry-leading, transportable, tank-fed safety shower designed for use in areas where temperatures range from -10°F to 100°F (-23°C to 38°C) and where potable water is not available. This shower is also used to provide a reliable, ANSI-compliant safety shower/eyewash combination that will always provide drench, even if mains water or wells fail. This Safety Shower includes:

    • 320-Gallon (1,200 Liter) Water Tank, Mounted on a Sturdy, Road-worthy Trailer
    • Immersion Heater to Warm and Maintain Water in ANSI-required Temperature Range
    • Overhead Shower with Stainless Steel Nozzle
    • Flexible, Hand-held, Flexible Eye/Facewash
    • Your Choice of 2” Ball Hitch or Pintle-Type Hitch
    • Electric Water Pump to Pressurize the System
    • All required Safety Signage
    • Optional Easy, 1-Year Water Treatment Filter
    • Optional Fiberglass Insulation Blanket for Cold Climates
     
  • GPS12E PT

    $24,500.00
    Electric/Pneumatic Trailer-Mounted, Transportable Safety Shower ANSI Z358.1 2009-Compliant Safety Shower/Eyewash Guarantees 15 Minutes of 20 gpm (75L/m) Tepid Drench The GPS12PT Safety Shower is an innovative, industry-leading, transportable, tank-fed safety shower designed for use in areas where temperatures range from -10°F to 100°F (-23°C to 38°C) and where potable water is not available. This shower is also used to provide a reliable, ANSI-compliant safety shower/eyewash combination that will always provide drench, even if mains water or wells fail. This product utilizes an electric immersion heater to heat the water and maintain water temperatures. However, water pressure is provided by a pneumatic water pump, which is powered with a K or N-type compressed gas cylinder (cylinder not included). This allows the shower to be heated overnight at a “base”, then hauled to a remote site with no water or electricity. You will have a fully-compliant safety shower on site. This Safety Shower includes:
    • 320-Gallon (1,200 Liter) Water Tank, Mounted on a Sturdy, Road-worthy Trailer
    • Immersion Heater to Warm and Maintain Water in ANSI-required Temperature Range
    • Overhead Shower with Stainless Steel Nozzle
    • Integrated ANSI-Compliant Eyewash Activated by Lifting Protective Cover
    • Your Choice of 2” Ball Hitch or Pintle-Type Hitch
    • Pneumatic Water Pump to Pressurize the System
    • All required Safety Signage
    • Optional Easy, 1-Year Water Treatment Filter
    • Optional Fiberglass Insulation Blanket for Cold Climates
  • GPS12S PTH

    $25,500.00

    Class 1, Division 2 Hazardous Area

    Electric/Pneumatic Trailer-Mounted, Transportable Safety Shower

    ANSI  Z358.1 2009-Compliant Safety Shower/Eyewash

    Guarantees 15 Minutes of 20 gpm (75L/m) Tepid Drench

    The GPS12PTH Class 1, Division 2 Hazardous Area Safety Shower is an innovative, industry-leading, transportable, tank-fed safety shower designed for use in areas where temperatures range from -10°F to 100°F (-23°C to 38°C), where a Class 1, Division 2 Hazardous Area Safety Shower solution is required, and where potable water is not available. This shower is also used to provide a reliable, ANSI-compliant safety shower/eyewash combination that will always provide drench, even if mains water or wells fail. This product utilizes an electric immersion heater to heat the water and maintain water temperatures. However, water pressure is provided by a pneumatic water pump, which is powered with a K or N-type compressed gas cylinder (cylinder not included). This allows the shower to be heated overnight at a “base”, then hauled to a remote site with no water or electricity. You will have a fully-compliant safety shower on site. This Safety Shower includes:

    • 320-Gallon (1,200 Liter) Water Tank, Mounted on a Sturdy, Road-worthy Trailer
    • Immersion Heater to Warm and Maintain Water in ANSI-required Temperature Range
    • Overhead Shower with Stainless Steel Nozzle
    • Integrated ANSI-Compliant Eyewash Activated by Lifting Protective Cover
    • Your Choice of 2” Ball Hitch or Pintle-Type Hitch
    • Pneumatic Water Pump to Pressurize the System
    • All required Safety Signage
    • Optional Easy, 1-Year Water Treatment Filter
    • Optional Fiberglass Insulation Blanket for Cold Climates
    • Class 1, Division 2-Compatible Components
  • GPSS3

    $2,495.00

    Transportable “Suitcase” Safety Shower

    ANSI  Z358.1 2009-Compliant Safety Shower/Eyewash – When Connected to a Tepid Water Source

    Guarantees 15 Minutes of 20 gpm (75L/m) Tepid Drench, When Connected to a Tepid Water Source.

    The GPSS3 Safety Shower is an innovative, industry-leading, transportable, safety shower designed for use in areas where no potable water is available and where traditional showers are not practicable. This Safety Shower includes:

    • Convenient “Suitcase” for Easy Transportation and Storage
    • Step-on Platform Activation
    • Small Footprint
    • Stainless Steel 316 Pipe
    • 3 Stainless Steel Spray Nozzles
    • Easy Set-up and Break-down
    • 16-foot Industrial Hose
    • 1” GEKA Inlet (Supplied with 1” Male NPT Adaptor)
  • Enclosed Safety Shower